SD-X Sniper Evo Pro Front Hub Wheel Bearing Set

The SD-X Sniper Evo Hubs are equipped with a premium SKF Explorer bearings, this one specifically used as the Evo Pro Front wheel bearings.

Manufactured from high-purity chromium bearing steel (100Cr6 / AISI 52100) and fitted with precision-ground, hardened steel balls, this bearing is designed to handle high loads while maintaining low friction.
Its optimized internal geometry ensures smooth driver rotation, reliable engagement, and long service life under the extreme forces generated during BMX racing.

Supplied as a set of two.

For maximum performance, reliability, and service life, we strongly recommend using the original SD-X specified wheel bearings.

Weight for a set of two: 43 Gram

SD-X Sniper Evo Air Front Hub Wheel Bearing Set

The SD-X Sniper Evo Hubs are equipped with a premium SKF Explorer bearings, this one specifically used as the Evo Air Front wheel bearings.

Manufactured from high-purity chromium bearing steel (100Cr6 / AISI 52100) and fitted with precision-ground, hardened steel balls, this bearing is designed to handle high loads while maintaining low friction.
Its optimized internal geometry ensures smooth driver rotation, reliable engagement, and long service life under the extreme forces generated during BMX racing.

Supplied as a set of two.

For maximum performance, reliability, and service life, we strongly recommend using the original SD-X specified wheel bearings.

Weight for a set of two: 30 Gram

SD-X Sniper Evo Rear Hub Wheel Bearing Set

The SD-X Sniper Evo Hubs are equipped with a premium SKF Explorer bearings, this one specifically used as the Evo rear wheel bearings.

Manufactured from high-purity chromium bearing steel (100Cr6 / AISI 52100) and fitted with precision-ground, hardened steel balls, this bearing is designed to handle high loads while maintaining low friction.
Its optimized internal geometry ensures smooth driver rotation, reliable engagement, and long service life under the extreme forces generated during BMX racing.

Supplied as a set of two and fits all Evo rear hub models, Air, Pro and HSX versions.

For maximum performance, reliability, and service life, we strongly recommend using the original SD-X specified wheel bearings.

Weight for a set of two: 32 Gram

SD-X Sniper Evo Driver Outer Bearing

The SD-X Sniper Evo Hubs are equipped with a premium SKF Explorer bearings, this one specifically used as the Driver Outer Bearing.

Manufactured from high-purity chromium bearing steel (100Cr6 / AISI 52100) and fitted with precision-ground, hardened steel balls, this bearing is designed to handle high loads while maintaining low friction.
Its optimized internal geometry ensures smooth driver rotation, reliable engagement, and long service life under the extreme forces generated during BMX racing.

For maximum performance, reliability, and service life, we strongly recommend using the original SD-X specified driver outer bearing.

Weight: 24 Gram

SD-X Sniper Evo Driver Inner Core Bearing

The SD-X Sniper Evo Hubs are equipped with a premium SKF Explorer bearings, this one specifically used as the Driver Inner Bearing.

Manufactured from high-purity chromium bearing steel (100Cr6 / AISI 52100) and fitted with precision-ground, hardened steel balls, this bearing is designed to handle high loads while maintaining low friction.
Its optimized internal geometry ensures smooth driver rotation, reliable engagement, and long service life under the extreme forces generated during BMX racing.

For maximum performance, reliability, and service life, we strongly recommend using the original SD-X specified driver inner bearing.

Weight: 6 Gram

SD-X Sniper Evo Pro Hub Clutch Bearing set + Grease

The SD-X Sniper Evo Pro Rear Hub is equipped with a two clutch bearings. This product is a direct replacement clutch bearing kit for your Sniper Pro (HSX) Rear hub.

The high-quality clutch bearings used in SD-X Sniper Evo Pro rear hubs are engineered to withstand extremely high loads while delivering long-lasting, reliable performance.

This clutch bearing is supplied with dedicated SD-X Sniper grease, specially formulated to maximize durability and smooth operation. More than enough grease is included for installation; however, only a portion of the supplied grease is required during assembly.

For detailed installation instructions and lubrication guidance, please refer to the installation video.

These bearings fits also the Sniper Evo Pro HSX rear hub.

Features
– Replacement clutch bearings for SD-X Sniper Evo Pro Rear Hub
– Designed to handle high loads and repeated engagement
– Ensures reliable and consistent hub performance
– Supplied with SD-X Sniper-specific grease
– Long service life under demanding race conditions

Weight as set: 29 Gram

SD-X Sniper Evo Air Hub Clutch Bearing + Grease

The SD-X Sniper Evo Air Rear Hub is equipped with a single clutch bearing. This product is a direct replacement clutch bearing for your Sniper Air (HSX) Rear hub.

The high-quality clutch bearings used in SD-X Sniper Evo Air rear hubs are engineered to withstand extremely high loads while delivering long-lasting, reliable performance.

This clutch bearing is supplied with dedicated SD-X Sniper grease, specially formulated to maximize durability and smooth operation. More than enough grease is included for installation; however, only a portion of the supplied grease is required during assembly.

For detailed installation instructions and lubrication guidance, please refer to the installation video.

This bearing fits also the Sniper Evo Air HSX rear hub.

Features
– Replacement clutch bearing for SD-X Sniper Evo Air Rear Hub
– Designed to handle high loads and repeated engagement
– Ensures reliable and consistent hub performance
– Supplied with SD-X Sniper-specific grease
– Long service life under demanding race conditions

Weight: 17 Gram

SD-X Sniper Evo Air Hub Driver

The SD-X Sniper Evo Air Hub Driver is available as a replacement driver for your existing Sniper Evo Air rear hub.

The driver is manufactured from high-quality aluminum and reinforced with a steel bushing. This carefully balanced material combination provides an ideal weight distribution.

This driver has been specifically engineered for the SD-X Sniper Evo Air (HSX) Rear Hub and is not compatible with other rear hubs.

Please note:
The driver is supplied without bearings. Bearings must be ordered separately.

Features
– Replacement driver for SD-X Sniper Evo Air Rear Hub and HSX models
– Aluminum driver body with reinforced steel bushing
– Optimized weight distribution for maximum performance
– Precision-machined for reliable power transfer
– Supplied without bearings

Weight: 57 Gram

SD-X Sniper Evo Pro Hub Driver

The SD-X Sniper Evo Pro Hub Driver is available as a replacement driver for your existing Sniper Evo Pro rear hub.

The driver is manufactured from high-quality steel for long time use.

This driver has been specifically engineered for the SD-X Sniper Evo Pro (HSX) Rear Hub and is not compatible with other rear hubs.

Please note:
The driver is supplied without bearings. Bearings must be ordered separately.

Features
– Replacement driver for SD-X Sniper Evo Air Rear Hub and HSX models
– High Quality steel driver
– Optimized weight distribution for maximum performance
– Precision-machined for reliable power transfer
– Supplied without bearings

Weight: 121 Gram

SD-X Sniper Evo Pro Front Hub Conversion Kit 10 mm

Conversion from 20mm to 10mm

The SD-X Sniper Evo Pro Front Hub Conversion Kit is designed to convert the Sniper Evo Pro front hub from a 20 mm thru-axle configuration to a 10 mm bolt-in setup.

Sniper Evo Pro front hubs are supplied as standard in a 20 mm configuration. With this conversion kit, the hub can be quickly and accurately converted to a 10 mm setup, making it ideal for riders who require compatibility with traditional 10 mm BMX race forks.

Please note:
To complete the conversion and ensure proper functionality, the SD-X Sniper Evo Bolt Caps Set and the SD-X Sniper Evo Titanium Bolts Set must be ordered separately. These components are required and are not included in this conversion kit.

Features
– Converts SD-X Sniper Evo Pro front hub from 20 mm to 10 mm
– Designed for forks with 10 mm dropouts
– Precision-engineered for easy installation
– Compatible exclusively with SD-X Sniper Evo Pro front hubs

Weight: 49 Gram