SHIMANO BL-MT501/BR-M6000 DISC BRAKE

The SHIMANO brake kit with its lever (BL-MT501) and its 2-piston brake caliper (BR-M6000).

Equipped with the SERVO-WAVE system, it offers remarkable and reliable performance while maintaining smooth operation. It features a short, two-finger lever that is slim and ergonomic for easy modulation of braking. The master cylinder and dual-piston caliper ensure powerful and reliable braking in all conditions.

Thanks to its I-SPEC clamp, installation is very quick and does not require removing the grips. The J-KIT system allows you to adjust the hose length before attaching it to the master cylinder and/or facilitates internal routing.

FEATURES

• Brake type: Hydraulic disc
• Lever: BL-MT501 / Right side / I-Spec collar / 2 fingers
• Caliper: BR-M6000 / Postmount / 2 pistons
• Hose: SM-BH59 – 1700mm
• J-Kit: Yes (the hose is not connected)
• Oil type: Mineral
• Weight: 308g

BRAKE INSTALLATION

• – Position your brake lever on your handlebars.
• – Mount your caliper onto the disc brake bracket.
• – Remove the black rubber cap from the end of the hose.
• – Remove the end caps located at the end of the brake levers.
• – Slide the black rubber nut cover onto the hose.
• – Do not peel off the small cap located on the end of the hose.
• – Insert the brake hose into the lever nut.
• – While ensuring the hose is properly seated at the bottom of the lever nut, tighten the nut to compress the olive inside the lever. There’s no need to overtighten; the nut’s threads should remain visible, as they will be concealed by the nut cover you previously slid onto the hose.
• – Now you can activate the brake to finalize its installation.

Magura Connector olive for disc brake

Magura olijfvormige sluitring schijfrem leiding

1 stuk

Magura Artikelnummer: 0720916

Magura Aansluitnippel v/remklauw

1 stuk

Magura Artikelnummer: 0720825

Magura Bat Plug Kit

BAT plug kit for Magura MT brakes, which covers the hole after removing BAT kit (lever bite point adjustement – short / long). The Magura plug kit covers the gap and ensures the lever will stay on its original place.  It comes with the spring and 90° closing ring.

Spare part 2701645 – BAT-Plug kit for MT6/MT7/MT8/MT TRAIL SL MT as of MY2015.

Elvedes hydroslang aansluiting set Magura

Elvedes artikelnummer: CP2019132

Elvedes olijfvormig deel SH02 Shimano (1st)

Magura disctube-leiding voor MT4 tot MT trail SL 2500mm

Remleiding voor Magura-schijfremmen. 90° banjo-aansluiting op de remklauw. Lengte 2500 mm.

Compatibel met MT4 eSTOP, MT5 eSTOP, MT C-serie, CMe-serie, MT4 ABS, MT A2, GUSTAV, CLARA, LOUISE

Niet geschikt voor Magura MT2 en MT Sport!

Inhoud van de levering: 1x remleiding, 1x Olive, 1x steunhuls, 1x holle schroef, 4x o-ring

Magura remgreep MT SPORT zwart 2-v Carbotecture-hendel

Shimano Hydraulische Schijfrem BR-MT805 2-zuigers Flat mount Achter