SHIMANO DEORE Hydraulische schijfremset BRM6100KTBLM6100 Rechts/achterzijde Kunststof zonder vin Zonder adapter 1700

SHIMANO BL-MT501/BR-M6000 DISC BRAKE

The SHIMANO brake kit with its lever (BL-MT501) and its 2-piston brake caliper (BR-M6000).

Equipped with the SERVO-WAVE system, it offers remarkable and reliable performance while maintaining smooth operation. It features a short, two-finger lever that is slim and ergonomic for easy modulation of braking. The master cylinder and dual-piston caliper ensure powerful and reliable braking in all conditions.

Thanks to its I-SPEC clamp, installation is very quick and does not require removing the grips. The J-KIT system allows you to adjust the hose length before attaching it to the master cylinder and/or facilitates internal routing.

FEATURES

• Brake type: Hydraulic disc
• Lever: BL-MT501 / Right side / I-Spec collar / 2 fingers
• Caliper: BR-M6000 / Postmount / 2 pistons
• Hose: SM-BH59 – 1700mm
• J-Kit: Yes (the hose is not connected)
• Oil type: Mineral
• Weight: 308g

BRAKE INSTALLATION

• – Position your brake lever on your handlebars.
• – Mount your caliper onto the disc brake bracket.
• – Remove the black rubber cap from the end of the hose.
• – Remove the end caps located at the end of the brake levers.
• – Slide the black rubber nut cover onto the hose.
• – Do not peel off the small cap located on the end of the hose.
• – Insert the brake hose into the lever nut.
• – While ensuring the hose is properly seated at the bottom of the lever nut, tighten the nut to compress the olive inside the lever. There’s no need to overtighten; the nut’s threads should remain visible, as they will be concealed by the nut cover you previously slid onto the hose.
• – Now you can activate the brake to finalize its installation.

Shimano Hydraulische Schijfrem BR-MT805 2-zuigers Flat mount Achter

Compatibility: BR-M9100, BR-M9110, BR-M8110, BR-R9270, BR-R8170, BR-R9170, BR-R8070, BR-R7070, BR-4770, BR-RS805, BR-RS505, BR-RS405, BR-RS305, BR-U5000, BR-RX810, BR-RX400